2010 Yamaha Yzf R125

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Fuel cap ineffective (6.1.3 (b) (i))

Fuel tank insecure (6.1.3 (a) (i))

Nearside Rear Drive chain excessively loose (6.1.7 (c) (i))

Nearside Rear Drive chain worn to excess (6.1.7 (c) (i))

Offside Front Direction indicator missing (4.4.1 (a) (ii))

Nearside Front Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Nearside Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

fairing insucure

Front Drive chain sprocket worn to excess (6.1.7 (c) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front All direction indicators missing (4.4.1 (a) (ii))

Offside Front All direction indicators missing (4.4.1 (a) (ii))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Exhaust noisy non standard fitted (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain worn but not considered excessive (6.2.1e)

Engine errattic ?

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Fairings insecure but not likely to impede the steering (2.1.2e)

Headlamp switching incorrect ?

Drive chain worn but not considered excessive (6.2.1e)

Engine errattic ?

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Fairings insecure but not likely to impede the steering (2.1.2e)

Headlamp switching incorrect ?

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Fuel cap mounting flange/sealing method defective (7.2.2c)

Rear suspension bush has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)