2001 Toyota Yaris

Anti-roll bar corroded but not seriously weakened Bith front (5.3.3 (b) (i))

Both Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Brake disc worn, but not excessively Front (1.1.14 (a) (i))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Both rear (1.2.1 (b) (i))

Coil spring corroded Both rear (5.3.1 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear chassis boot floor & axle (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has a slightly worn bush All around (5.3.2 (c))

Subframe mounting prescribed area is corroded but not considered excessive Front (5.3.6 (a) (i))

Wheel bearing has slight play Both front (5.1.3 (a) (i))

Anti-roll bar damaged but not seriously weakened Both front (5.3.3 (b) (i))

Both Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Brake disc worn, but not excessively Front (1.1.14 (a) (i))

Brake pipe corroded, covered in grease or other material Both rear (1.1.11 (c))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Both rear (1.2.1 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear chassis boot floor & axle (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has a slightly worn bush Both rear (5.3.2 (c))

Subframe mounting prescribed area is corroded but not considered excessive Front (5.3.6 (a) (i))

Wheel bearing has slight play Both front (5.1.3 (a) (i))

Anti-roll bar damaged but not seriously weakened Both front (5.3.3 (b) (i))

Both Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Brake disc worn, but not excessively Front (1.1.14 (a) (i))

Brake pipe corroded, covered in grease or other material Both rear (1.1.11 (c))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Both rear (1.2.1 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear chassis boot floor & axle (6.2.2 (d) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has a slightly worn bush Both rear (5.3.2 (c))

Subframe mounting prescribed area is corroded but not considered excessive Front (5.3.6 (a) (i))

Wheel bearing has slight play Both front (5.1.3 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security rear chassis boot floor & axle (6.2.2 (d) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Vehicle structure corroded

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

all underneath corroded

Rear Exhaust has a minor leak of exhaust gases numerous small holes in pipe into rear box (7.1.2)

backing plates for discs corroded/parts missing

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

n/s rear tyre cracking

o/s rear tyre low on pressure

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Front brake caliper has restricted free movement (3.5.1k)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

n/s front brakes slightly binding

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s front brakes binding slightly

Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s rear tyre low on pressure

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake disc slightly pitted (3.5.1h)