2002 Toyota Corolla

general underbody corrosion but nothing holed

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Service brake excessively binding (1.2.1 (f))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

long hand brake travel

Rear Service brake excessively binding (1.2.1 (f))

underside / paneling / steering / suspension / braking components all areas showing / signs of becoming slightly advanced in places /vehicle poss been stood for some time

Brake lever has insufficient reserve travel hand brake travel high / no resserve travel (1.1.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Service brake excessively binding front brakes binding (1.2.1 (f))

Front Windscreen washer not working (3.5 (a))

Headlamp aim projected beam image is obviously incorrect both head light lens fogged over / h/light beam patterns deffused (4.1.2 (c))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Service brake excessively binding both rear brakes binding to excess / noise on n/s/r / internal shoes / / unable to rotate (1.2.1 (f))

underside / paneling / steering / suspension / braking components all areas showing corrosion / signs of becoming slightly advanced in places / signs of vehicle been stood for some time

Front Headlamp lens slightly defective Both (4.1.1 (b) (i))

Front Windscreen wiper blade defective Both (3.4 (b) (i))

Front suspension arms corroded

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear shock absorber corrosion

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Parking brake lever has little reserve travel (3.1.6b)

both front head lamps frosted over but still showing beam pattern

Headlamp aim too low both front head lamp aims too low (1.8)

Parking brake lever has little reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid both front washer jets missing screen (8.2.3)

both front head lamps frosted over but still showing beam pattern

ENGINE OIL LEAK - BACK OF ENGINE

REAR WIPER BLADE SPLIT

STEERING / SUSPENSION / EXHAUST / BRAKE COMPONENTS SHOWING SIGNS OF CORROSION

Brake pad(s) less than 1.5 mm thick REAR (3.5.1g)

Brake pipe excessively corroded BOTH REAR MAIN BRAKE PIPES (3.6.B.2c)

Headlamp aim too low BOTH (1.8)

Side repeater incorrect colour O/S SHOWING WHITE (1.4.A.2f)

ENGINE OIL LEAK - BACK OF ENGINE

REAR WIPER BLADE SPLIT

STEERING / SUSPENSION / EXHAUST / BRAKE COMPONENTS SHOWING SIGNS OF CORROSION

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has no reserve travel (3.1.6b)

offsdie rear tyre ntread deformed

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offsdie rear tyre ntread deformed

Front Direction indicators incorrect colour (1.4.A.2f)

Parking brake lever has no reserve travel (3.1.6b)

rear tyres developing uneven wear

rear tyres developing uneven wear

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate character(s) not correctly formed (6.3.4b)

Rear registration plate character(s) not correctly formed (6.3.4b)

Front Windscreen wiper blade deteriorated (8.2.2)

Indicator switch faulty (1.4.A.1)