2006 Toyota Aygo

Exhaust noisy (8.1.1 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust noisy (8.1.1 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Horn not working (7.7 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Nearside Rear Outer sill sign of corrosion

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn bpth sides (5.1.2 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

rear end corroded

tested in wet condition

Offside Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front & rear sill (6.2.2 (d) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Nearside Rear Outer sill sign of corrosion

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn bpth sides (5.1.2 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

rear end corroded

tested in wet condition

Front Headlamp has a product on the lens but not seriously reducing light output N/S & O/S (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material N/S & O/S (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced N/S & O/S (6.1.1 (c) (i))

Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt N/S & O/S (5.3.4 (b) (ii))

Indicator switch inoperative (4.4.2 (a) (ii))

Front Brake disc in such a condition that it is seriously weakened N/S & O/S (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick N/S & O/S (1.1.13 (a) (ii)) DANGEROUS

Rear Tyre has a tear, caused by separation or partial failure of its structure N/S & O/S (5.2.3 (d) (ii)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output N/S & O/S (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material N/S & O/S (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced N/S & O/S (6.1.1 (c) (i))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Both front tyres on 2mm

Registration plate lamp not working (1.1.C.1d)

o/s outer sill dented

Both front tyres on 2mm

o/s outer sill dented