2008 Kia Sorento

Front Brake pad(s) wearing thin x2 nsf osf (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin x2 nsr osr (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin x2 nsr osr (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Brake pipe excessively corroded main front to rear (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Brake pipe excessively corroded main front to rear (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Play in steering rack inner joint(s) ()

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Position lamp not working both front (4.2.1 (a) (ii))

Stop lamp(s) not working both rear (4.3.1 (a) (ii))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Power steering ram(s) leaking from a failed component (2.3.3b)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components