2012 Peugeot Partner

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))

Offside Rear Nail in tyre ()

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Horn not working properly (7.7 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Inner Brake pad(s) wearing thin VERY CLOSE TO LIMIT (1.1.13 (a) (ii))

Nearside Rear Upper SURFACE CORROSION AROUND UPPER SHOCK ABSORBER MOUNTING

Offside Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Inner Brake pad(s) wearing thin VERY CLOSE TO LIMIT (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement bearing worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Seat belt stitching badly frayed (5.2.2b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Direction indicator incorrect colour both sides (1.4.A.2f)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust has a minor leak of exhaust gases at turbo (7.1.2)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)