2014 Peugeot 208

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Brake performance unable to be tested binding (1.2.1 (g))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Rear Service brake excessively binding both (1.2.1 (f))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

rear axle corroded

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Outer Tyre worn close to legal limit/worn on edge X2 (5.2.3 (e))

Handbrake travel

Rear Axel corrosion

Rear Brake hose has slight corrosion to ferrule X2 (1.1.12 (f) (i))

Slate handbrake drive

Manufactures engine, axle and body covers fitted restricting inspection of components

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Exhaust silencer slightly loose Bracket has become detached (8.1.1 (b) (i))

Exhaust system insecure exhaust corroded / both front / centre support brackets corroded / snapped off / ex insecure (6.1.2 (a))

both front tyres wearing very close to legal limits / both on 2.mm / 2.5 mm strong advise to replace 185 / 65 / 15

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing Also has a nail in treads (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Brake pad(s) wearing thin Fronts (3.5.1g)

Exhaust back box support bracket broken

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)