2016 Ksr Moto Grs

Drive chain slightly loose (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Nail in tyre ()

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Steering operation fouling on the fuel tank or bodywork on full lock lock stops broken off (2.1.4 (b))

Offside Steering operation fouling on the fuel tank or bodywork on full lock lock stops broken off (2.1.4 (b))

Offside Steering operation fouling on the fuel tank or bodywork on full lock throttle (2.1.4 (b))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Shock absorber has negligible damping effect doesn't work (5.3.2 (b))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front worn unevenly

Rear worn unevenly

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Brake effort inadequate at a wheel (1.2.1 (a) (i))

Front Brake lever pivot has excessive free play (1.1.1 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Brake performance not tested (1.2.1 (g))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Exhaust system insecure (6.1.2 (a))

Front Headlamp aim not tested (4.1.2 (b))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Nearside Front Footrest insecure (6.2.12 (a))

Nearside Front Upper Shock absorber insecurely attached BOLTS MISSING & LOOSE (5.3.2 (a) (i))

Rear Brake clevis joint insecure Rear clevis pin MISSING (1.1.15 (c))

Rear Brake component modification unsafe REAR BRAKE PEDAL (1.1.21 (d) (i))

Rear Brake performance not tested (1.2.1 (g))

Rear Brake pivot excessively worn (1.1.15 (b))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Drive chain worn to excess (6.1.7 (c) (i))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Exhaust system insecure (6.1.2 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) DANGEROUS

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Horn control insecure POSITIONED SO THAT IT CANT BE OPERATED EASILY (7.7 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Exhaust noisy (8.1.1 (a))

Exhaust silencer likely to become detached (8.1.1 (b) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))