MOT Status
ExpiredMileage
28,602 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front position lamp(s) not working (1.1.A.3b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Play in steering rack inner joint(s)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
both sides front brake discs pitted
n/s/r inner wheel arch has corrosion
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Headlamp aim too high (1.8)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Play in steering rack inner joint(s)
catalytic converter and mid section of exhaust deteriorated may soon need replacement
various areas of surface corrosion to floor that may soon need attention
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.0)
Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Nearside Headlamp aim too high (1.8)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp aim too low (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear reflector missing (1.5.1a)
Nearside Registration plate lamp not working (1.1.5c)
Offside Rear reflector missing (1.5.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Offside Rear fog lamp not working (1.3.2b)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake master cylinder leaking hydraulic fluid (3.6.G.1f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
front and rear number plates not of standard type but meet the requirements for the mot but may not for the police
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FJ03 DWG is a 2003 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 47.4%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FJ03 DWG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FJ03 DWG?
You can check the full history of FJ03 DWG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FJ03 DWG registered?
FJ03 DWG is a 2003 Ford Ka, first registered on 24 April 2003.
Is FJ03 DWG safe to buy?
The MOT history for FJ03 DWG shows 19 tests with a 47.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FJ03 DWG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FJ03 DWG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.