MOT Status
ExpiredMileage
81,938 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Headlamp aim too low (1.8)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded sills (2.4.A.3)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion (6.1.B.2)
Battery insecure (1.9.1)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Power steering pipe(s) or hose(s) excessively corroded (2.3.2)
Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Emissions not tested (7.0)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp aim too low (1.8)
Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Registration plate lamp not working (1.1.5c)
Nearside rear tyre cracking slightly
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside rear tyre cracking slightly
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FJ03 WVT is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 52.4%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FJ03 WVT, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FJ03 WVT?
You can check the full history of FJ03 WVT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FJ03 WVT registered?
FJ03 WVT is a 2003 Ford Ka, first registered on 1 March 2003.
Is FJ03 WVT safe to buy?
The MOT history for FJ03 WVT shows 21 tests with a 52.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FJ03 WVT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FJ03 WVT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.