2004 Aprilia Rst 1000

Central Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Oil leak from front and rear valve covers

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Central Rear Lower Suspension component pin or bush excessively worn Lower linkage bushes/bearings excessively worn (5.3.4 (a) (i))

Drive chain excessively tight (6.1.7 (k) (i))

Front Brake excessively binding (1.2.1 (f))

Rear Tyre fouling another component Mudguard fouling against tyre (5.2.3 (f))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Central Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Front Wheel bearings not checked due to front brakes excessively binding

No coolant in expansion tank

Oil leak from front and rear valve covers

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp aim too high (4.1.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake fluid below minimum mark (1.1.10 (d) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Horn not working (7.7 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Brake pad(s) close to minimum limit All (1.1.13 (a))

Brake pad(s) close to minimum limit All (1.1.13 (a))

Stop lamp not working (4.3.1 (a) (ii))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Oil leak Pipe connection ()

Steering movement slightly 'notchy' (2.2.1b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Rear Brake cylinder slightly corroded (3.2.B1b)

front brakes begining to bind (not excessive)

Brake pedal is bent but brake can still be readily applied (3.1.3c)