MOT Status
ExpiredMileage
100,793 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Side repeater slightly discoloured (1.4.A.2f)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Under-trays fitted obscuring some underside components
both side repeators fading.
n/s front bottom arm bushes splitting.
o/s front anti roll bar link rod play.
o/s front bottom arm bushes splitting.
o/s front tyre worn on inner edge.
slight hole in o/s front c v boot.
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
both side repeators fading.
n/s front bottom arm bushes splitting.
o/s front anti roll bar link rod play.
o/s front bottom arm bushes splitting.
o/s front tyre worn on inner edge.
slight hole in o/s front c v boot.
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Coolant leak
Nearside Registration plate lamp not working (1.1.5c)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Coolant leak
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Registration plate lamp not working (1.1.5c)
Brake pad(s) wearing thin (3.5.1g)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FJ51 CNC is a 2001 Peugeot 206 in Blue with a 1,997cc diesel engine. This vehicle has been through 12 MOT tests with a personal pass rate of 58.3%.
Across all 2001 Peugeot 206 models, the average MOT pass rate is 66.3% with a typical mileage of 67,765 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying FJ51 CNC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 25 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FJ51 CNC?
You can check the full history of FJ51 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FJ51 CNC registered?
FJ51 CNC is a 2001 Peugeot 206, first registered on 1 September 2001.
Is FJ51 CNC safe to buy?
The MOT history for FJ51 CNC shows 12 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FJ51 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FJ51 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.