2001 Yamaha DT125

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Headlamp aim too low (4.1.2 (a))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Front Steering movement slightly 'notchy' (2.2.1b)

Front Wheel has a slightly distorted bead rim. Both sides (4.2.2)

Number plate may not comply to current regulations

Rear Lower Rear suspension bush has slight free play (2.4.A2a(i))

front brake hose rubbing on clutch lever

Rear mono-shock pivot worn but not excessive (2.4.B.4)

n/s front shocker boot split

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front wheel bearings have excessive free play (2.3.5b)

Nearside Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Offside Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Rear Wheel spoke excessively loose (4.2.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

n/s front shocker boot split

Rear brake is slightly binding

Front Wheel spoke excessively loose (4.2.1b)

Rear Brake component leaking fluid (3.2.B4)

Rear Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake pad(s) contaminated by oil or grease (3.2.A1k)

Rear Footrest missing (6.2.1a)

Rear Wheel spoke excessively loose (4.2.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

rear tyre contaminated with brake fluid

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Registration plate deteriorated (6.3.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too low (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle obscured (1.4.1)

Registration plate character(s) likely to be misread (6.3.4b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))