2007 Yamaha DT125R Sm

Front Brake hose slightly deteriorated outer cover (1.1.12 (b) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake hose slightly deteriorated outer cover (1.1.12 (b) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Drive chain slightly tight (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear suspension bearing has slight free play (2.4.A2a(i))

Headlamp aim too low (1.6)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil light misting (2.3.3)

Rear Rear suspension bearing has excessive free play (2.4.A2a(i))

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Drive chain slightly tight (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear shock absorber has a light misting (2.4.A.1c)

front brake binding slightly

Drive chain worn to excess (6.2.1e)

Headlamp aim too high (1.6)

Horn not working (1.7.3a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Rear Direction indicator insecure (1.5.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear shock absorber has a light misting (2.4.A.1c)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp insecure (1.2.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))