2002 Jaguar Xj

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outter seal (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point floor (5.3.6 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive arch (7.1.1 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive arch (7.1.1 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Fuel Pipe/s corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

EML light on

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre slightly damaged (5.2.3 (d) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pad(s) wearing thin general (3.5.1g)

Brake pipe slightly corroded generally all (3.6.B.2c)

Front Brake hose has slight corrosion to ferrules offside/nearside (3.6.B.4e)

Front Brake hose slightly deteriorated offside/nearside (3.6.B.4d)

Front brake disc worn, pitted or scored, but not seriously weakened offside/nearside (3.5.1i)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Inner Drive shaft which forms part of the suspension support bearing slightly worn (2.4.G.4d)

Offside Inner Drive shaft which forms part of the suspension support bearing slightly worn (2.4.G.4d)

Rear Brake hose has slight corrosion to ferrules offside/nearside (3.6.B.4e)

Rear Brake hose slightly deteriorated offside/nearside (3.6.B.4d)

Rear brake disc worn, pitted or scored, but not seriously weakened offside/nearside (3.5.1i)

exhaust shows general in service corrosion

Brake pipe slightly corroded generally all (3.6.B.2c)

Front Brake hose has slight corrosion to ferrules offside and nearside (3.6.B.4e)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear Brake hose has slight corrosion to ferrules offside and nearside (3.6.B.4e)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened offside and nearside (3.5.1i)

exhaust show general in service corrosion

front and rear brake discs show some wear/scoring

rear diff./drive shaft bearings show some end float

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front front brake binding (3.7.B.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front and rear brake discs show wear/scoring

Both front tyres worn on inner edges

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust systems corroded

Front Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front coil spring corroded (2.4.C.1b)

Fuel pipes corroded

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Oil leak

Power Steering pipes corroded

Rear Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear coil spring corroded (2.4.C.1b)

Various chassis corrosion

Various floor corrosion

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Both front tyres worn on inner edges

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust systems corroded

Front Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front coil spring corroded (2.4.C.1b)

Fuel pipes corroded

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Oil leak

Power Steering pipes corroded

Rear Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear coil spring corroded (2.4.C.1b)

Various chassis corrosion

Various floor corrosion

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

front tyres worn on inner edges

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nearside front chassis area starting to corrode

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)