2003 Ford Ka

Exhaust has a minor leak of exhaust gases mid to rear joint (6.1.2 (a))

Road wheel slightly distorted both front and both rear (5.2.2 (c) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wheel arches (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive chassis area near sub frame mounts at fropnt (5.3.6 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area (5.3.6 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases mid to rear joint (6.1.2 (a))

Road wheel slightly distorted both front and both rear (5.2.2 (c) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner wheel arches (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive chassis area near sub frame mounts at fropnt (5.3.6 (a) (i))

Offside Front slight play in strut top mount

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front sub frame mounting area (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Suspension arm pin or bush excessively worn front arm rear bush both sides at front (5.3.4 (a) (i))

Windscreen wiper does not clear the windscreen effectively both front (3.4 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front slight play in strut top mount

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front sub frame mounting area (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Large rear bush (5.3.4 (a) (i))

Offside Rear Nail in tyre ()

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Brake hose slightly deteriorated nearside and offside front (3.6.B.4d)

oil leak

Oil leak

eml light on

EML. lamp is on

front brake discs rusty/pitted

Offside Front coil spring fractured (2.4.C.1a)

EML. lamp is on

front brake discs rusty/pitted

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)