2006 Vauxhall Vivaro

Brake pipe corroded, covered in grease or other material all brake pipes greased (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Play in steering rack inner joint(s)

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material all brake pipes greased (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Play in steering rack inner joint(s)

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material all brake pipes greased (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Brake pipe corroded, covered in grease or other material all brake pipes greased (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Spare tyre defective

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Position lamp not working offside & nearside front (4.2.1 (a))

Brake pad(s) wearing thin offside & nearside rear (1.1.13 (a) (ii))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Spare tyre defective

Front Headlamp aim too low both (1.8)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Anti-roll bar rubber bush deteriorated resulting in excessive movement Both (2.4.G.2)

Front registration plate deteriorated (6.3.1d)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively Both (8.2.2)

rear parking brake recording little or no effort Both (3.7.B.6a)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s)

g-box oil leak

Front Body has a sharp edge caused by damage (6.1.C.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s)

g-box oil leak

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)