MOT Status
ValidMileage
145,511 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing area under bonnet (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting area (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing area under bonnet (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting area (5.3.6 (a) (i))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting area (5.3.6 (a) (i))
Offside Front seatbelt slow to retract
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front brake application only just met requirements
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Play in steering rack inner joint(s) ()
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Front Play in steering rack inner joint(s) ()
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Windscreen damaged slightly
Items removed from driver's view prior to test ()
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
rear brake application only just met requirement
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
osf head light slightly fogged
osr number plate light on with a tap
rear discs lightly corroded
steering rack feels notchey when side to side applyied at steering wheel
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FL07 VTM is a 2007 Mercedes-benz Vito in White with a 2,148cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2007 Mercedes-benz Vito models, the average MOT pass rate is 69.6% with a typical mileage of 122,038 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying FL07 VTM, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 19 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FL07 VTM?
You can check the full history of FL07 VTM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FL07 VTM registered?
FL07 VTM is a 2007 Mercedes-benz Vito, first registered on 27 March 2007.
Is FL07 VTM safe to buy?
The MOT history for FL07 VTM shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FL07 VTM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FL07 VTM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.