MOT Status
ExpiredMileage
70,632 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre is cracked
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive nearside front & offside front (5.2.6)
coil spring corroded all 4 (2.4.C.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear tyre worn on inner edge
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear tyres cracked
Seat belt anchorage prescribed area is corroded but not considered excessive nearside front & offside front (5.2.6)
coil spring corroded all 4 (2.4.C.1b)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
coil spring corroded all 4 (2.4.C.1b)
rear tyres cracked
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
parts of exhaust system deteriorated
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside rear wheel bearing noisey
parts of exhaust system deteriorated
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front tyres worn on edges
parts of exhaust system corroded
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
parts of exhaust system corrodid
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
near side rear tyer cracked
parts of exhaust system corrodid
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FL08 OXV is a 2008 Ford Ka in Black with a 1,599cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FL08 OXV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FL08 OXV?
You can check the full history of FL08 OXV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FL08 OXV registered?
FL08 OXV is a 2008 Ford Ka, first registered on 31 March 2008.
Is FL08 OXV safe to buy?
The MOT history for FL08 OXV shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FL08 OXV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FL08 OXV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.