2008 Kia Picanto

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive ENGINE (8.4.1 (a) (i))

Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt BOTH SIDES (5.3.4 (b) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive ENGINE (8.4.1 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim too low (4.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Front Brake pipe corroded, covered in grease or other material BOTH . TO WHEEL CYL (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material BOTH . TO WHEEL CYL (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn lower rear bush (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front tyre badly worn on inner edge

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front tyre badly worn on inner edge

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded TO FLEXIBLE BRAKE HOSE. (1.1.11 (c))

Front Exhaust mounting defective CORRODED/BROKEN. (6.1.2 (a))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front TYRE SIDEWALL WORN, SUSPECT BEEN RUN FLAT.

Offside Rear Brake pipe slightly corroded TO FLEXIBLE BRAKE HOSE. (3.6.B.2c)

Nearside Front TYRE SIDEWALL WORN, SUSPECT BEEN RUN FLAT.

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pipe slightly corroded TO FLEXIBLE BRAKE HOSE. (3.6.B.2c)

Central Items removed from driver's view prior to test

Offside Rear Brake pipe slightly corroded TO FLEXIBLE BRAKE HOSE. (3.6.B.2c)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Central Items removed from driver's view prior to test

Offside Rear Brake pipe slightly corroded TO FLEXIBLE BRAKE HOSE. (3.6.B.2c)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Centre EXHAUST SYSTEM MOUNTING CORRODED/BROKEN.

Offside front tyre sidewall cracking

Rear tyres cracking

Stop lamp not working (1.2.1b)

Offside front tyre sidewall cracking

Rear tyres cracking

advise front wipers starting to smear

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

advise BOTH front tyres down to 3mm