MOT Status
ValidMileage
172,065 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Electronic stability control warning lamp not working (7.12 (e))
Front Position lamp light intensity obviously reduced both sides light is dim (4.2.3 (a) (i))
Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))
Vehicle structure is corroded but structural rigidity is not significantly reduced under the floor few places (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Tyre slightly damaged/cracking or perishing both sides front tyres wearing and nearing 2mm (5.2.3 (d) (ii))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced under the floor few places (6.1.1 (c) (i))
plastic cover fitted top of the engine and under the floor
Vehicle structure is corroded but structural rigidity is not significantly reduced under the floor few places (6.1.1 (c) (i))
plastic cover fitted top of the engine and under the floor
Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides front inner sills and near jacking point (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced under the floor few places (6.1.1 (c) (i))
plastic cover fitted top of the engine and under the floor
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre slightly damaged/cracking or perishing and wearing and getting low to nearing 2mm (5.2.3 (d) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Vehicle structure is corroded but structural rigidity is not significantly reduced under the floor few places (6.1.1 (c) (i))
Front both sides front tyres wearing and getting low to nearing 2mm
Offside Front Service brake binding but not excessively (1.2.1 (f))
plastic cover fitted top of the engine and under the floor
Offside Front Service brake binding but not excessively (1.2.1 (f))
plastic cover fitted top of the engine and under the floor
both front tyres are wearing slightly on the inner edges
n/s/r inner wheel rim is slightly distorted
Parking brake efficiency below requirements (1.4.2 (a) (i))
both front tyres are wearing slightly on the inner edges
n/s/r inner wheel rim is slightly distorted
plastic cover fitted top of the engine and under the floor
engine covers and under trays fitted obscuring some components.
n/s/r tyre is wearing on the inner and outer edges.
o/s/f wheel inner rim is slightly distorted.
o/s/r tyre has a nail in the tread, and is wearing on the inner edge.
Rear both rear tyres wearing edges
plastic cover fitted top of the engine and under the floor
Front both fronttyres wearing edges
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view black tape on (8.1.2a)
plastic cover fitted top of the engine and under the floor
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Offside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
wiper blades poor
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp aim too high (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too high (1.8)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front brake discs slightly worn.
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake discs slightly worn.
Rear exhaust slightly corroded.
Under-trays fitted obscuring some underside components
Front brake discs slightly worn.
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake discs slightly worn.
Rear exhaust slightly corroded.
Under-trays fitted obscuring some underside components
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
washers frozen
How Reliable is the Seat Alhambra?
Based on 690,916 MOT tests across 54,940 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FL08 ZZV is a 2008 Seat Alhambra in Silver with a 1,968cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 77.3%.
Across all 2008 Seat Alhambra models, the average MOT pass rate is 69.5% with a typical mileage of 101,087 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Seat Alhambra fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 23,231 recorded failures. If you're considering buying FL08 ZZV, it's worth having these areas checked by a mechanic before committing.
The Seat Alhambra typically stays on UK roads for around 30 years. At 18 years old, this Seat Alhambra is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FL08 ZZV?
You can check the full history of FL08 ZZV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FL08 ZZV registered?
FL08 ZZV is a 2008 Seat Alhambra, first registered on 31 March 2008.
Is FL08 ZZV safe to buy?
The MOT history for FL08 ZZV shows 22 tests with a 77.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FL08 ZZV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FL08 ZZV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.