2003 Peugeot Boxer

Battery insecure (1.9.1)

Brake pipe excessively corroded front to rear pipe (3.6.B.2c)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded box sides (2.4.A.3)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Subframe mounting prescribed area is excessively corroded chassis and inner wing (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at front mounting (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member (2.4.A.3)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded cross member mounting (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing front (2.4.A.3)

Offside Front Upper Suspension spring mounting prescribed area is excessively corroded box sides (2.4.A.3)

Offside Front front brake excessively fluctuating (3.7.B.3)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member (2.4.A.3)

Offside Windscreen wiper blade insecure (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust system not adequately supported (7.1.1)

Rear Spare wheel carrier insecure cross member corroded (6.4.2)

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine underguard insecure

handbrake cable started to fray

wear in rear shock absorbers

Nearside Front Coil spring mounting corroded and seriously weakened (2.4.C.3c)

Nearside Front Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicators incorrect colour (1.4.A.2f)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

engine underguard insecure

Brake pad(s) less than 1.5 mm thick front (3.5.1g)

Seat belt anchorage prescribed area is excessively corroded n/s/floor holed x2 (5.2.6)

Seat belt anchorage prescribed area is excessively corroded o/s/sill and under sill holed (5.2.6)

Suspension arm rubber bush deteriorated resulting in excessive movement rear axle bushs (2.4.G.2)

Suspension arm synthetic bush deteriorated but not resulting in excessive movement both front (2.4.G.2)

Brake load sensing valve seized (3.6.E.3)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill centre and rear (6.1.B.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill centre and rear (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Leaf spring deteriorated and seriously weakened (2.4.B.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Stop lamp not working centre (1.2.1b)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

centre silencer has heavy surface corrosion

heater matrix leaking

o/s front bottom engine cover loose

Front Direction indicators slightly discoloured (1.4.A.2f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Direction indicators slightly discoloured (1.4.A.2f)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Upper Shock absorber has an excessively worn bush (2.7.4)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Direction indicators slightly discoloured (1.4.A.2f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Direction indicators slightly discoloured (1.4.A.2f)

centre silencer box has heavy surface corrosion

o/s and n/s front inner wings have heavy surface corrosion

o/s inner wheel arch corroded

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

centre silencer box has heavy surface corrosion

o/s and n/s front inner wings have heavy surface corrosion

Exhaust system not adequately supported (7.1.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

metal clutch pipe badly corroded

nail in o/s rear tyre

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Front Brake pad(s) wearing thin (3.5.1g)