2004 Mazda MX-5

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust noisy (8.1.1 (a))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened pitted (1.1.14 (a) (ii))

Central Exhaust has a major leak of exhaust gases joint (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Exhaust noisy (8.1.1 (a))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened pitted (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement slight play in bottom ball joint (5.3.4 (a) (i))

heavily under sealed

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement slight play in bottom ball joint (5.3.4 (a) (i))

heavily under sealed

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

All direction indicators not working (4.4.1 (a) (ii))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Rear Brakes imbalanced across an axle 46% (1.2.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

all brake discs have thin coating of corrosion, vehicle has been standing for a while

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Service brake excessively binding (1.2.1 (f))

all discs coated in layer of corrosion, vehicle has been standing for a period of time

chip in screen

rear discs corroded

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

rear discs corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rear brake discs corroded

rear brake discs corroded

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

exhaust becoming corroded

front and rear brake discs becoming corroded

front brake pads worn low

handbrake travel excessive

o/s/f tyre feathering on outer edge

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

corrosion starting on power steering pipes

long travel at parking brake lever