2004 Jaguar X-type

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Anti-roll bar linkage ball joint has slight play both front (5.3.4 (a) (i))

Brake disc worn, but not excessively both front (1.1.14 (a) (i))

Brake disc worn, but not excessively both rear (1.1.14 (a) (i))

Brake pad(s) wearing thin both rear (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills (7.1.1 (a) (i))

engine cover fitted

heavily under sealed

sill covers fitted

Brake pipe excessively corroded Metal brake pipe in clips by petrol tanks (1.1.11 (c))

Central Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Central Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill Corroded and holed (6.2.2 (d) (i))

Offside Rear Brake pipe excessively corroded Metal pipe to flexi hose. (1.1.11 (c))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded and holed. (6.2.2 (d) (i))

Fuel Pipe/s corroded ()

Offside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Sill covers fitted. There may be more corrosion present further up the sills.

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases front pipe (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear All direction indicators slightly discoloured (4.4.3 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear All direction indicators slightly discoloured (4.4.3 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front registration plate deteriorated (6.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Oil leak ()

Exhaust has a minor leak of exhaust gases frontFLEXI TO PIPE CORRODED (7.1.2)

Front registration plate faded but not likely to be misread (6.3.1d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Fuel pipe/s corroded

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Engine covers fitted obscuring some components in the engine bay

Oil leak

Under-trays fitted obscuring some underside components

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear wheel bearing has excessive play (2.6.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

sill covers fitted not allowing full inspection

brake discs badly corroded but pulling up ok on brake tester

Offside Front coil spring incomplete (2.4.C.1a)

brake discs badly corroded but pulling up ok on brake tester

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)