MOT Status
ExpiredMileage
76,149 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake lever has insufficient reserve travel (1.1.2 (a))
Emissions unable to be completed exhaust leak (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working side light (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened all (5.3.3 (b) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all covered in grease (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Manufactures covers fitted restricting inspection of components
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all covered in grease (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Manufactures covers fitted restricting inspection of components
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal outer sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal outer sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Rear Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Brake fluid contaminated (1.8 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal outer sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal outer sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))
Rear Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
195/55/15 X 4,
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREAS (7.1.1 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREAS (7.1.1 (a) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
195/55/15 X 4,
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
advise stone chip in o/s front lower windscreen.advise front tyres wearing in side edges slightly.
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Windscreen wiper blade insecure (8.2.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
n/s/r tyre worn on outer edge
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
rear tyres cracking.
Nearside Front Shock absorber has a light misting of oil (2.7.3)
REAR TYRES CRACKING. SLIGHT MOVEMENT IN FRONT SUSPENSION UPPER BEARINGS.
Nearside Front Shock absorber has a light misting of oil (2.7.3)
corrosion to exhaust. rear tyres starting to crack.
slight movement in front upper strut top bearings.
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
slight sidewall damage to n/s/f tyre
How Reliable is the Chevrolet Lacetti?
Based on 203,671 MOT tests across 15,288 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FL55 UMU is a 2005 Chevrolet Lacetti in Silver with a 1,399cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2005 Chevrolet Lacetti models, the average MOT pass rate is 68.6% with a typical mileage of 52,333 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chevrolet Lacetti fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 8,485 recorded failures. If you're considering buying FL55 UMU, it's worth having these areas checked by a mechanic before committing.
The Chevrolet Lacetti typically stays on UK roads for around 21 years. At 21 years old, this Chevrolet Lacetti is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of FL55 UMU?
You can check the full history of FL55 UMU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FL55 UMU registered?
FL55 UMU is a 2005 Chevrolet Lacetti, first registered on 23 September 2005.
Is FL55 UMU safe to buy?
The MOT history for FL55 UMU shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FL55 UMU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FL55 UMU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.