2005 Toyota Aygo

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill not seam welded (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside arch (7.1.1 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside arch (7.1.1 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle n/s effort low (1.2.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension component mounting repair covered in underseal all rear (5.3.6 (a) (i))

heavily undersealed at rear, previous repairs

rear axle beam corroded

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

heavily undersealed

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp has a product on the lens but not seriously reducing light output both tarnished (4.1.4 (b))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill to sill (7.1.1 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both tarnished (4.1.4 (b))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded (6.1.1 (c) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger to rear axle mount corroded holed (6.2.2 (d) (i))

Front Exhaust mounting defective (6.1.2 (a))

Exhaust mounting defective middle missing (6.1.2 (a))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust mounting defective middle missing (6.1.2 (a))

Brake pipe corroded, covered in grease or other material all appear to have been greased (1.1.11 (c))

Front Headlamp lens slightly defective dull (4.1.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn trailing arm bushes (5.1.2 (b) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Brake pipe corroded, covered in grease or other material all appear to have been greased (1.1.11 (c))

Front Headlamp lens slightly defective dull (4.1.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn trailing arm bushes (5.1.2 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides trialling arm bush (5.3.4 (a) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Offside Rear body damage

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Headlamp deteriorated but light output not reduced both (1.7.5a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened both (3.5.1i)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Headlamp deteriorated but light output not reduced both (1.7.5a)

brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)