MOT Status
ExpiredMileage
198,934 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Track rod end slightly misaligned (2.1.3 (e))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced sills on both sides (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Outer Anti-roll bar pin or bush worn but not resulting in excessive movement both bushes (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked yellow (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked yellow (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, marked yellow (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked yellow (5.3.6 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, marked yellow (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced sills on both sides (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Rear Outer Anti-roll bar pin or bush worn but not resulting in excessive movement both bushes (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Passenger seat(s) missing at time of test ()
Unable to carry out corrosion assessment on outer sills due to plastic trims fitted
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Passenger seat(s) missing at time of test ()
Unable to carry out corrosion assessment on outer sills due to plastic trims fitted
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i))
Offside Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front out rigger inner sill corroded
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed (6.1.1 (c) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front out rigger inner sill corroded
Nearside Rear tyre air pressure low
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Brake hose excessively chafed (3.6.B.4d)
Offside Front Brake hose slightly chafed (3.6.B.4d)
How Reliable is the Seat Alhambra?
Based on 690,916 MOT tests across 54,940 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FL56 UNZ is a 2006 Seat Alhambra in Silver with a 1,968cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2006 Seat Alhambra models, the average MOT pass rate is 69.4% with a typical mileage of 102,410 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Seat Alhambra fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 23,231 recorded failures. If you're considering buying FL56 UNZ, it's worth having these areas checked by a mechanic before committing.
The Seat Alhambra typically stays on UK roads for around 30 years. At 20 years old, this Seat Alhambra is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FL56 UNZ?
You can check the full history of FL56 UNZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FL56 UNZ registered?
FL56 UNZ is a 2006 Seat Alhambra, first registered on 7 October 2006.
Is FL56 UNZ safe to buy?
The MOT history for FL56 UNZ shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FL56 UNZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FL56 UNZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.