2006 Citroen C2

Nail in rear tyre

osr brake slight binding

tailbox bracket broken

Nearside Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nail in rear tyre

osr brake slight binding

tailbox bracket broken

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Power steering malfunctioning (2.3.3a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

lower gearbox support bracket insecure

n/s mirror glass missing

Exhaust system not adequately supported (7.1.1)

Front Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Driver's seat cannot be secured in the upright position. (6.2.A.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

lower gearbox support bracket insecure

n/s mirror glass missing

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nsr tyre has cut not reaching cords

rear exhaust bracket fractured

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Horn not working (1.6.2a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Obligatory mirror missing (8.1.1)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nsf tyre raised outer/inner edges 1mm

nsr tyre has cut not reaching cords

rear exhaust bracket fractured

Offside Front Headlamp not working on dipped beam (1.7.5a)