2012 Mazda 6

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms (5.3.4 (a) (i))

corrosion underside vehicle - sills, subframes, suspension components, rear bush collets swollen

Front Brake disc worn, but not excessively also rear (1.1.14 (a) (i))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion underside vehicle - sills, subframes, suspension components

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Vehicle Identification Number not displayed (0.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension arm corroded but not seriously weakened front and rear arms (5.3.3 (b) (i))

rear sub-frame corroded

sill covers fitted obscuring inspection of sills

under-tray fitted obscuring underside components

underside corrosion present

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower suspension arm rear bush slight play

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective rubber (6.1.2 (a))

under body covers fitted

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Front Lower suspension arm rear bush slight play

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective rubber (6.1.2 (a))

under body covers fitted

Offside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Power steering malfunctioning (2.1.5 (a))

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear exhaust rubber damaged nut still holding exhaust securley

Rear Brake pad(s) wearing thin (3.5.1g)

electrical wire running along underside of vehicle

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components