2012 Fiat Doblo

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

rear exhaust box corroded

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

rear exhaust box corroded

Offside Rear Inner Tyre slightly damaged/cracking or perishing side wall (5.2.3 (d) (ii))

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front discs in poor condition

hand brake travel high

wipers alittle smeary

offside front top strut bearing sticking slightly on lock to lock check