2012 Ford Mondeo

engine cover fitted

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

engine cover fitted

Front Lower Engine mounting damaged but not to excess Engine mount knocking but unable to see the amount of play due to undertray... (6.1.8 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Anti roll bar D Bush excessively perished... (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material OSR brake pipe corroding and oxidizing... (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule Both rear brake hose ferules corroding, OSR brake pipe corroding and oxidizing... (1.1.12 (f) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear control arm bushes perishing and have slight play... (5.3.4 (a) (i))

Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Offside Rear Brake pad(s) worn down to wear indicator Next to no friction material left on pad. Knocking when rear brakes applied in brake rollers... (1.1.13 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Lower Engine mounting damaged but not to excess Engine mount knocking but unable to see the amount of play due to undertray... (6.1.8 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened discolored and signs of over heating... (1.1.14 (a) (ii))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Anti roll bar D Bush excessively perished... (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material OSR brake pipe corroding and oxidizing... (1.1.11 (c))

Rear Both rear brakes knocking when brakes applied, Calipers knocking and grabbed. Maybe Caliper sliders needed to be replaced?...

Rear Brake hose has slight corrosion to ferrule Both rear brake hose ferules corroding, OSR brake pipe corroding and oxidizing... (1.1.12 (f) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear control arm bushes perishing and have slight play... (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine and under tray cover fitted.

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)