MOT Status
ValidMileage
191,500 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Items removed from driver's view prior to test
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material brake hose to brake caliper (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Oil leak, but not excessive gearbox (8.4.1 (a) (i))
Towbar corroded
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Sub-frame pin or bush excessively worn axle/subframe (5.3.4 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Items removed from driver's view prior to test
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material brake hose to brake caliper (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material to brake hose (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Oil leak, but not excessive gearbox (8.4.1 (a) (i))
Towbar corroded
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced sill pannel (6.1.1 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced sill pannel (6.1.1 (a) (i))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FL62 VWR is a 2012 Vauxhall Vivaro in White with a 1,995cc diesel engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2012 Vauxhall Vivaro models, the average MOT pass rate is 67.7% with a typical mileage of 102,326 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying FL62 VWR, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 14 years old, this Vauxhall Vivaro is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FL62 VWR?
You can check the full history of FL62 VWR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FL62 VWR registered?
FL62 VWR is a 2012 Vauxhall Vivaro, first registered on 31 October 2012.
Is FL62 VWR safe to buy?
The MOT history for FL62 VWR shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FL62 VWR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FL62 VWR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.