2013 Mercedes-benz Sprinter

Central Front Oil leak, but not excessive Nearly at the point of being an MOT fail (8.4.1 (a) (i))

Nearside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Exhaust mounting defective Mounting from gear box to DPF missing (6.1.2 (a))

Central Front Oil leak, but not excessive Nearly at the point of being an MOT fail (8.4.1 (a) (i))

Nearside Front Headlamp aim too high Very High (4.1.2 (a))

Nearside Front Outer Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Exhaust mounting defective Mounting from gear box to DPF missing (6.1.2 (a))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp aim too low very low (4.1.2 (a))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre worn close to legal limit/worn on edge **damage in tread** (5.2.3 (e))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Oil leak, but not excessive from engine bay (8.4.1 (a) (i))

Hydraulic brake calliper inadequately mounted offside rear brake caliper bolts missing (1.1.16 (c) (i))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Oil leak, but not excessive from engine bay (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

nearside rear fog lamp not working lens broken bulb not fitted

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

nearside rear fog lamp not working lens broken bulb not fitted

Nearside Front Shock absorbers has a slightly worn bush play in upright (5.3.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread number plate scuffed and bent (0.1 (b))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output n/s headlamp has a lot of water in lamp causing condensation in lamp affecting light output (4.1.4 (b))

Front Sub-frame is deformed and structural rigidity is significantly reduced front sub frame front cross brace has been split by jack plate ,caused deformation and split/crack and pressing against power steering hose. (6.1.1 (a) (i))

Nearside Rear Outer Position lamp not working bulb not working (4.2.1 (a))

Offside Rear Inner Position lamp not working bulb not working (4.2.1 (a))

Front Registration plate deteriorated but not likely to be misread number plate scuffed and bent (0.1 (b))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output n/s headlamp has a lot of water in lamp causing condensation in lamp affecting light output (4.1.4 (b))

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)