MOT Status
ExpiredMileage
135,953 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Fluid suspension unit leaking (2.4.D.2)
Nearside Rear Registration plate lamp not working (1.1.5c)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Power steering pipe(s) or hose(s) leaking (2.3.3b)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)
Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Registration plate lamp not working (1.1.5c)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Front registration plate deteriorated (6.3.1d)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp aim too high (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FLZ 9806 is a 2001 Mazda 323 in Silver with a 1,499cc petrol engine. This vehicle has been through 9 MOT tests with a personal pass rate of 66.7%.
Across all 2001 Mazda 323 models, the average MOT pass rate is 71.0% with a typical mileage of 68,232 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying FLZ 9806, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 25 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FLZ 9806?
You can check the full history of FLZ 9806 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FLZ 9806 registered?
FLZ 9806 is a 2001 Mazda 323, first registered on 1 July 2001.
Is FLZ 9806 safe to buy?
The MOT history for FLZ 9806 shows 9 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FLZ 9806 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FLZ 9806. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.