MOT Status
ExpiredMileage
84,428 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill To Floor (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Macpherson strut has slight movement at the upper attachment Both side front (2.5.A.1c)
Offside Body has slight corrosion sill (6.1.B.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Stop lamp not working (1.2.1b)
Registration plate lamp not working One lamp not working (1.1.C.1d)
Macpherson strut has slight movement at the upper attachment Both side front (2.5.A.1c)
Offside Body has slight corrosion sill (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Items removed from driver's view prior to test
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Items removed from driver's view prior to test
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Headlamp aim too low (1.8)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel badly damaged (4.2.A.1a)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
FM03 BWW is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying FM03 BWW, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of FM03 BWW?
You can check the full history of FM03 BWW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was FM03 BWW registered?
FM03 BWW is a 2003 Ford Ka, first registered on 20 June 2003.
Is FM03 BWW safe to buy?
The MOT history for FM03 BWW shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does FM03 BWW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on FM03 BWW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.