2004 Mazda MX-5

Driver's airbag missing (7.1.5 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Horn not working (7.7 (a))

Rear Exhaust has a major leak of exhaust gases pipe broken (6.1.2 (a))

Rear Exhaust system insecure (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Anti-roll bar linkage ball joint has slight play both rear (5.3.4 (a) (i))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear tyres worn

sills rusted

slight oil leak rear

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s front inner sill corroded (6.2.2 (d) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s rear inner sill corroded (6.2.2 (d) (i))

Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s front inner sill corroded (6.2.2 (d) (i))

Offside Rear Nail in tyre

Tyre slightly damaged/cracking or perishing 2x front (5.2.3 (d) (ii))

Windscreen wiper blade defective (3.4 (b) (i))

oil leak diff

rear tyres close to limit

sills corroded

back pads worn

Suspension arm pin or bush worn but not resulting in excessive movement front and rear arm bushes slightly deteriorated (5.3.4 (a) (i))

offside front brake back plate corroding

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

both rear lower trailing arm bushes starting to perish

front n rear subframes rusty

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

both rear lower trailing arm bushes starting to perish

earth strap broken on diff

front n rear subframes rusty

Nearside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front and rear outer sill starting to corrode

Offside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Front front brake binding (3.7.B.1)

front brake application uneven (3.7.B.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front and rear outer sill starting to corrode

Offside Rear Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

eml on

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)