2006 Peugeot 107

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

CORROSION UNDERSIDE

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

REAR SHOCK ABSORBERS CORRODED

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement o/s & n/s (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Offside Rear tyre cracking

Tyre worn close to the legal limit both front (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear tyre cracking

Tyre worn close to the legal limit both front (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)