2008 Ford Ka

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Fuel pipe insecure Filter insecure (6.1.3 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Central Integral body structure is corroded but structural rigidity is not significantly reduced nearside and offside (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Shock absorbers has slight external damage to the casing corrosion (5.3.2 (b))

Rear Brake hose slightly deteriorated perished both hoses (1.1.12 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring broken (2.4.C.1a)

Front brake disc worn, pitted or scored, but not seriously weakened Corroded on inner surfaces (3.5.1i)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

nsf rear wishbone bush peeling slightly

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

nsf rear wishbone bush peeling slightly

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)