2005 Kia Cerato

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear tyre has cuts in tread

Nearside door mirror damaged

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

damp around powered steering rack

Nearside Front cv boot pin holed

Nearside Rear slight brake bind

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front cv boot pin holed

Nearside Rear slight brake bind

brake pipes corroded

both rear tyres worn edges

front lower arm suspension arm bushes slight deterioration

steel wheel fitted to osf

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

front lower arm suspension arm bushes slight deterioration

steel wheel fitted to osf

Front different wheels fitted across an axle ,same size tyres fitted

rear brake pads wearing low

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Brake pipe excessively corroded (3.6.B.2c)

exhaust slight corrosion

various marks and scratches on vechicle and alloys

Front front brake application uneven (3.7.B.2)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

exhaust slight corrosion

various marks and scratches on vechicle and alloys

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front brake discs worn,pads appear to be wearing low.recommend attention.

Front registration plate delaminated (6.3.1d)

Nearside Rear Brake relay lever has restricted free movement (3.5.1k)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate delaminated (6.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

bonnet release lever broken

front brake discs worn,pads appear to be wearing low.recommend attention.

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)