2013 Peugeot 208

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust mounting defective (6.1.2 (a))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Outer Tyre slightly damaged sidewall (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Outer Tyre slightly damaged sidewall (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust system insecure box (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect also broken inside? and brackets broken (4.1.2 (c))

Central Exhaust mounting defective corroded off (6.1.2 (a))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer sidewall (5.2.3 (d) (i))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e))

exhaust rear box front mount loose

Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)