2008 Honda Civic

Oil leak, but not excessive (8.4.1 (a) (i))

after market bulbs fitted

ball joint split pins missing

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

aftermarket bulb fitted

balljoint split pins missing

front fog lights not working

slight oil leak

Coolant leak ()

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm 2254018 (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Coolant leak ()

Central Rear Brake hose has slight corrosion to ferrule offside (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

exhaust back box clamp corroded away

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Headlamp insecure (4.1.1 (c))

Offside Front Side repeater not working in the mirror (4.4.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Sub-frame attachment bracket/mounting insecure axle bolt (5.3.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Brake hose slightly twisted (1.1.12 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both dust covers (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Nail in tyre ()

under trays fitted at the time of test

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside front brake binding (3.7.B.1)

Offside Front Nail in tyre ()

under trays fitted at the time of test

Offside Front Shock absorber has a light misting of oil (2.7.3)

Front Anti-roll bar linkage has slight play in a ball joint bothsides (2.4.G.2)

Front Headlamp cleaning device inoperative (1.7.2)

Front Headlamp levelling device obviously defective (1.7.2)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Outer Front registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front position lamp(s) slightly discoloured (1.1.A.3e)

Offside Front position lamp(s) slightly discoloured (1.1.A.3e)

Rear Exhaust noisy (7.1.4)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

poor image on headlights

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

poor image on headlights