2006 Toyota Aygo

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps both (4.7.2 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area is inadequately repaired must be seem welded (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Inner Suspension component mounting prescribed area is inadequately repaired must be seem welded (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside rear brake pipe slightly corroded

Offside rear brake pipe slightly corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outside sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outside sill (5.3.6 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside rear brake pipe slightly corroded

Offside rear brake pipe slightly corroded

Brake pipe slightly corroded nearside front to rear. (3.6.B.2c)

Brake pipe slightly corroded offside front to rear. (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit 2mm (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Rear rear brake binding (3.7.B.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit 2mm (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

ns front to rear brake pipe slightly corroded

os front to rear brake pipe slightly corroded

os rear brake pipe to wheel cylinder slightly corroded

Front Exhaust system not adequately supported exhaust mounting broken (7.1.1)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

ns front to rear brake pipe slightly corroded

os front to rear brake pipe slightly corroded

os rear brake pipe to wheel cylinder slightly corroded

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front exhaust mounting corroded off.

Interior mirror deteriorating.

Items removed from driver's view prior to test

Offside Headlamp damaged but light output not reduced (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front exhaust mounting corroded off.

Interior mirror deteriorating.

Items removed from driver's view prior to test

Offside Headlamp damaged but light output not reduced (1.7.5a)

Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Offside Headlamp damaged but light output not reduced (1.7.5a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Reversing sensors failed ( siren permanent when reverse selected )

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside front brake disc badly worn

Offside front brake disc heavily worn and corroded

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)