2007 Chrysler-jeep 300

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. both side (1.4.2 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

under tray covers fitted time of test

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

general corrosion underneath

Front Inner Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

general corrosion underneath

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Nail in tyre ()

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Rear Nail in tyre ()

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)