2008 Ford Ka

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

General underbody and various suspension components corroded

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

All repairs heavily undersealed

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s rear bushes borderline (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle beam bush borderline (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outer sill area (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn axle beam bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill area (5.3.6 (a) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s rear bushes borderline (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle beam bush borderline (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Front and rear outer sill (6.2.2 (d) (i))

Offside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Front and rear outer sill (6.2.2 (d) (i))

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Stop lamp not working (1.2.1b)

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Oil leak engine ()

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/r inner sill corroded

o/s/r inner and outer sill corroded

rear tyres cracking on tread

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in offside front tyre

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/r inner sill corroded

o/s/r inner and outer sill corroded

rear tyres cracking on tread

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

All Four Tyres Have Small Cracks in Tread/Sidewall.

n/s/f tyre wall cracked and perished

n/s/r tyre wall cracked and perished

o/s/f tyre wall cracked and perished

o/s/r tyre wall cracked and perished