2013 Peugeot 208

Drivers mirror back cover missing

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides rear bushes (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge Worn on edges (5.2.3 (e))

Offside Mirror plastic housing missing

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Obligatory mirror slightly damaged Glass cracked (3.3 (b) (i))

Offside Obligatory mirror slightly damaged Back cover missing (3.3 (b) (i))

Emissions unable to be completed Blowing (8.2.1.2 (d))

Exhaust system insecure Mounting brackets broken at front and missing at rear (6.1.2 (a))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Obligatory mirror slightly damaged Glass cracked (3.3 (b) (i))

Offside Obligatory mirror slightly damaged Back cover missing (3.3 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Rear Wheel bearing slightly noisy Nearside and offside (5.1.3 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Side repeater not working Located on wing mirror (4.4.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm 185/65/15 (5.2.3 (e)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Wheel bearing slightly noisy Nearside and offside (5.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear exhaust mount missing

Nearside Rear tyre cracked on sidewalls 5012 dot code

Offside Front Tyre worn close to legal limit/worn on edge 2/3mm and cracked on sidewalls 4912 dot code (5.2.3 (e))

Offside Rear tyre cracked on sidewalls and screw in tread 5012 dot code

Rear exhaust mounting broken

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear tyre cracked on sidewalls 5012 dot code

Offside Front Tyre worn close to legal limit/worn on edge 2/3mm and cracked on sidewalls 4912 dot code (5.2.3 (e))

Offside Rear tyre cracked on sidewalls and screw in tread 5012 dot code

Rear exhaust mounting broken

Brake pad(s) wearing thin Offside & Nearside Front Brake Pads (3.5.1g)

Nearside Rear Tyre Perished

Offside Front Tyre worn close to the legal limit 2-3mm & Perished (4.1.E.1)

Rear Exhaust Box Mount Corroded / Missing, But Exhaust Secure

Advise rear exhaust mounting bracket missing

brake disc worn, pitted or scored, but not seriously weakened Both Front (3.5.1i)