2003 Suzuki GZ125

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Wheel alignment slightly misaligned (2.4 (a))

Fuel system component leaking (6.1.3 (b) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Advise Further Check For Wheel Bearing Rumble, Benefit Of Doubt Given As Could Be Brake Rub

Front Tyre worn close to the legal limit (5.2.3 (e))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Wheel corroded

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Wheel corroded

Drive chain worn but not considered excessive (6.2.1e)

Tyre showing signs of age related cracking on side walls

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake locking device missing (3.2.A1e)

Drive chain worn but not considered excessive (6.2.1e)

Brake pedal cannot be released smoothly (3.1.3d)