2005 Aprilia RX50

Front Wheel has a slightly distorted bead rim. (4.2.2)

Steering movement slightly 'notchy' (2.2.1b)

chain guard missing

Brake lever is positioned so that the brake cannot be readily applied fluid pot incorrect position (3.1.3c)

Drive chain fouling another component fitted incorrect, chain roller defective (6.2.1d)

Front Brake master cylinder insecurely mounted incorrectly mounted (3.2.B1a)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp deteriorated and function impaired high beam tell tell (1.2.3a)

Indicator tell tale not functioning all (1.5.2)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking side stand (6.1.1c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate incorrect incorrect number plate (6.3.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Steering movement slightly 'notchy' (2.2.1b)

chain guard missing

Rear wheel bearings have slight free play (2.4.A.2c)

Direction indicators affected by the operation of another lamp (1.5.1c)

Front Tyre tread not clearly visible (4.1.3(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn is not a constant note (1.7.3c)

Rear Tyre tread not clearly visible (4.1.3(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Brake disc(s) has slight run out (3.2.A1m)

Steering movement slightly stiff (2.2.1b)

Drive chain worn to excess (6.2.1e)

Drive chain excessively loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake disc(s) has slight run out (3.2.A1m)

Steering movement slightly stiff (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)