2004 Ford Ka

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

h/brake cables slightly insecure

Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Both inner and outer sills corroded

Oil leak ()

Play in steering rack inner joint(s) ()

Suspension arm has slight play in a ball joint Both front lower (2.4.G.2)

Suspension spring mounting prescribed area is corroded but not considered excessive Both rear (2.4.A.3)

Vehicle structure has slight corrosion (6.1.B.2)

Both inner and outer sills corroded

Oil leak ()

Play in steering rack inner joint(s) ()

Suspension arm has slight play in a ball joint Both front lower (2.4.G.2)

Suspension spring mounting prescribed area is corroded but not considered excessive Both rear (2.4.A.3)

Vehicle structure has slight corrosion (6.1.B.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Main beam 'tell-tale' not working (1.7.4c)

Offside Front Inner brake disc contaminated by oil (3.5.1h)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brake hose slightly deteriorated both fronts (3.6.B.4d)

Oil leak engine oil ()

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

corrosion to sills

Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside wiper blade just starting to split on ends

Offside Rear coil spring fractured (2.4.C.1a)

Nearside Front coil spring fractured (2.4.C.1a) DANGEROUS

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside wiper blade just starting to split on ends

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)