2004 Honda Civic

Corrosion on inner sills n/s and o/s

No seats or seat belts fitted to rear of vehicle

Exhaust noisy (8.1.1 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play and nearside rear (5.3.4 (a) (i))

exhaust system resting on body

front fog lights not working

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak from middle section joints (8.2.1.1 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Brake pipe connection leaking on a hydraulic braking system from hose to pipe (1.1.11 (b) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Nearside head light poorly secured

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play and nearside rear (5.3.4 (a) (i))

exhaust system resting on body

front fog lights not working

front tyre slighly worn on edges

Exhaust noisy baffle fitted to existing exhaust (7.1.4)

Front Brake pipe slightly corroded to rear to union at front (3.6.B.2c)

Nearside Anti-roll bar linkage has slight play in a ball joint and offside rear (2.4.G.2)

Nearside Brake pipe slightly corroded and offside rear (3.6.B.2c)

Rear Wheel/tyre protruding beyond wheel arch ()

engine management light on

front splitter protrudes from front bumper

parking brake caliper levers not returning fully

rear seats removed

sill covers fitted

Electrical wiring deteriorated and bare wires exposed lambda sensor (1.9.2c)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

front splitter protrudes from front bumper

Front Brake pipe slightly corroded to rear to union at front (3.6.B.2c)

Nearside Anti-roll bar linkage has slight play in a ball joint and offside rear (2.4.G.2)

Nearside Brake pipe slightly corroded and offside rear (3.6.B.2c)

Rear Wheel/tyre protruding beyond wheel arch ()

engine management light on

parking brake caliper levers not returning fully

rear seats removed

sill covers fitted

clicking from n/s inner rack joint

engine management light on

exhaust centre pipe flange corroded and weak

front to rear brake pipes at front to union slight corrosion

front tyres wearing low on inner edges

no spare wheel

play in o/s/f strut

rear seats not fitted at time of test

sill covers fitted

Electrical wiring insecure horn switch (1.9.2a)

Front registration plate insecure (6.3.1b)

Front registration plate obscured by wiper blade (6.3.1d)

Nearside Front Electrical wiring inadequately supported abs wiring rubbing on brake hose (1.9.2a)

Nearside Front position lamp(s) incorrect colour and offside (1.1.A.3e)

Offside Headlamp aim too high (1.8)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' front number plate (8.3.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)

clicking from n/s inner rack joint

engine management light on

exhaust centre pipe flange corroded and weak

front to rear brake pipes at front to union slight corrosion

front tyres wearing low on inner edges

no spare wheel

play in o/s/f strut

rear seats not fitted at time of test

sill covers fitted

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

engine management light on

rear seats not fitted at time of test

Electrical wiring inadequately supported headlight wiring (1.9.2a)

Horn not working (1.6.2a)

Nearside Headlamp aim too high (1.8)

Nearside Tyre tread depth below requirements of 1.6mm and offside front (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

engine management light on

items removed from screen prior to test

rear seats not fitted at time of test

n/s washer jet poor aim

rear tyres have signs of catching

rear wiper blade split

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Macpherson strut insecure (2.4.G.1) DANGEROUS

n/s washer jet poor aim

rear tyres have signs of catching

rear wiper blade split

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

nsf washer jet partially blocked

rear exhaust joint corroded

slight play ns and osf anti roll bar links

EPS light came on briefly during test

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

front brake pads looked low

nsf tyre 2mm inner edge

rear exhaust joint badly corroded

n/s/r coil spring corroded

o/s/f coil spring rusted

nearside front and offside front inner wheel arches have liners fitted not allowing full inspection

nearside front shock absorber has slight play in piston

nearside outer and offside outer sills have covers fitted not allowing full inspection

nearside rear and offside rear inner wheel arches have liners fitted not allowing full inspection