2006 Honda Accord

Under tray/fitted.

Underbody corrosion.

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Front Registration plate inscription illegible (0.1 (b))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Under tray/fitted.

Underbody corrosion.

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Lower Suspension component pin or bush slightly worn Both side shocker bushes (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Underbody and suspension components has general rust

Central Exhaust has a minor leak of exhaust gases Joint (6.1.2 (a))

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar linkage ball joint has slight play Both sides (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Underbody and suspension components rusty

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

rear axle corroded

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Tyre worn close to the legal limit both rear (4.1.E.1)

Nearside Inner Rear position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Tyre worn close to the legal limit both rear (4.1.E.1)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

exhaust flexie split

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

exhaust flexie split

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Play in steering rack inner joint(s)

exhaust flexie split

Engine covers fitted obscuring some components in the engine bay

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Play in steering rack inner joint(s)

Under-trays fitted obscuring some underside components

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)